MacroQuest

ARTICLE UNDER CONSTRUCTION

EZServer is a boxing server. Most people on this server play either 6 or 12 characters. In order to do this efficiently, and without completely losing your mind, you have to use a character management system. Enter MacroQuest.

MacroQuest, along with EQBCServer, allows you to use one character to remotely control all of your other characters. It also allows you to do a few tricks that would not be possible without it.

Installing MacroQuest

1. Download Macroquest. Select "Underfoot" for Client, and "Classic" for build, then click download
2. Extract the files to a new folder under your EverQuest directory (or any location you can remember) 2. Run "MacroQuest2.exe" and "EQBCServer.exe" before launching client

Uses for MacroQuest

Dynamic Map
MacroQuest populates your map with the location of all NPCs in real time. - you can right click the NPC on the map to target it

Target
/target NPC - Targets any NPC in zone

Stick

• This is a MUCH better version of /follow from EQLive.
• add "uw" after stick to make characters look down when sticking, this helps with water following or levitation (e.g. "/stick uw")
• add a number after stick to specify the distance to follow (e.g. "/stick 1" -or- "/stick 20")
• add "behind" to stay behind an NPC (useful for rogues, or to avoid rampage damage) (e.g. "/stick behind")
• Any of the above commands can be combined (e.g. "/stick 15 behind uw")

Basic allowed uses for MacroQuest:

• /target npcname (targets any npc in zone)
• /stick (much better version of /follow)
• /bca //command (tells all of your characters except the one issuing the command to do a specified command)
• /bcaa //command (tells all of your characters including the one issuing the command to do a specified command)
• /bct charactername //command (tells charactername to do a specified command)
• /itemnotify slotname rightmouseup right-clicks specified item
• Dynamic map NPC locations (all NPC locations show up on minimap in real time)