MacroQuest

ARTICLE UNDER CONSTRUCTION

EZServer is a boxing server. Most people on this server play either 6 or 12 characters. In order to do this efficiently, and without completely losing your mind, you have to use a character management system. Enter MacroQuest.

MacroQuest, along with EQBCServer, allows you to use one character to remotely control all of your other characters. It also allows you to do a few tricks that would not be possible without it.

Installing MacroQuest

1. Download Macroquest. Select "Underfoot" for Client, and "Classic" for build, then click download
2. Extract the files to a new folder under your EverQuest directory (or any location you can remember) 2. Run "MacroQuest2.exe" and "EQBCServer.exe" before launching client

Uses for MacroQuest

Target
/target NPC - Targets any NPC in zone

Dynamic Map
MacroQuest populates your map with the location of all NPCs in real time. - you can right click the NPC on the map to target it

Stick

• This is a MUCH better version of /follow from EQLive.
• add "uw" after stick to make characters look down when sticking, this helps with water following or levitation (e.g. "/stick uw")
• add a number after stick to specify the distance to follow (e.g. "/stick 1" -or- "/stick 20")
• add "behind" to stay behind an NPC (useful for rogues, or to avoid rampage damage) (e.g. "/stick behind")
• Any of the above commands can be combined (e.g. "/stick 15 behind uw")

Basic allowed uses for MacroQuest:

• /target npcname (targets any npc in zone)
• /stick (much better version of /follow)
• /bca //command (tells all of your characters except the one issuing the command to do a specified command)
• /bcaa //command (tells all of your characters including the one issuing the command to do a specified command)
• /bct charactername //command (tells charactername to do a specified command)
• /itemnotify slotname rightmouseup right-clicks specified item
• Dynamic map NPC locations (all NPC locations show up on minimap in real time)